I have an issue with the operation of relay #2, during a reboot of the Cerbo GX
I am using relay #2 in a 2 way switching arrangement to turn a Webasto hot water heater on/off (allows me to do this remotely).
So a relay 2 state of 'ON' can still mean the heater is off (by the 2nd switch).
I noticed tonight when doing a reboot (due to a Wi-Fi issue) that the relay switches 'OFF' during the reboot phase - thus turning the diesel heater ON, then when the reboot is finished the relay turns back 'ON' (ie returns to previous state), thus turning the heater back off.
Why can't the relay hold the 'ON' state during a reboot?
I am running v2.66
What's Victrons view on this?