question

philemon avatar image
philemon asked

Phoenix inverser keep on "low battery"

Hello,

M'y Phoenix inverser 12-375 wont work. It just blink red slowly. It means low battery, but my battery IS 12,6 v so it should work.


Any Idea ?


Thank you.

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

12.6v would be ok for a battery that was fully charged a couple of days ago...

What sort of load do you want to run from your mystery battery??

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

"mystery battery" :o) :o) :o)

A slow flashing red LED could also mean high DC-ripple on these models.

Maybe DC wires undersized?

0 Likes 0 ·
Show more comments
philemon avatar image
philemon answered ·

I want to charge my laptop, 90w max says the charger.

My battery is a 3s li ion battery with max current 12.6 v. So it IS within the current range of thé inverter right ?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

3s li ion is 10.8V nominal. That's too low.

0 Likes 0 ·