Hi all,
I've got a Multiplus 12/3000, Cerbo GX and VE.Bus BMS at the heart of my system.
A while back I unfortunately found out that the Multiplus cannot be controlled remotely using the Cerbo GX when a VE.Bus BMS is present. The On/Off/Charge Only. The only way to control it is with the switch located on the front of the MP.
So I'm looking at other solutions to allow me to switch the Multiplus between on and charge only. I have no need for the off function.
I think relay 2 on the Cerbo GX would be good for this. Does anyone see any potential issues? My Multiplus is well out of warranty and I have no issues with removing the physical switch from the device if I can't manage to solder wires alongside it.
Please let me know what you think!
Thank you.