question

john-2 avatar image
john-2 asked

MPPT 150/70 - RUNNING 6 X 320W PANELS (2 SERIES STRINGS)

Hi - I'm running the 150/70 with 6 panels (320W). Two strings of 3 panels - connected in a combined bow before plugging into the MPPT. I'm only getting 110V and 0.3 AMPS ? Also only getting up to 40W off the solar array. Anyone have a suggestion ?

1623082325968.png

battery charging
1623082325968.png (92.9 KiB)
6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@john-2 What are your batteries? and battery settings

0 Likes 0 ·
john-2 avatar image john-2 Alexandra ♦ commented ·

Running 8 of these in two 4 battery series

EVL16A-A-ABS (3).pdf

0 Likes 0 ·
evl16a-a-abs-3.pdf (240.1 KiB)
Show more comments
1 Answer
denzel avatar image
denzel answered ·

HI,

Im running the same setup, Depending on how you have configure your Inverter , you wont see the full power eg: If you set to use solar to change batteries and power loads then send surplus power to the grid you will the solar run at its maximum .


Regards

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic