This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a problem with the way VRM is displaying dashboard.
When I select "external grid power meter" (EM24) dashboard looks as follows.
When I select Inverter/Charger as a grid power meter dashboard look as follows.
Someone told me that it is correct behavior (the layout not the numbers), but my system looks like below:
There is no load between grid_power_meter and MP-II so why I have power going to AC-loads?
All my loads are on the Essential AC loads.
Any suggestions?
Double check your EM24 wiring. BR
Hi Markus,
Can you explain why this numbers are more or less ok?
Here EM24 is wired the same and is used as a grid power meter.
Here only 16W are "missing in action".
3633 - 390 - 3051 - (195*0.9) = 16
Imagine the influence, if grid export is reported as grid import and vice versa by the meter.
I don’t know what you mean.
I am suggesting, that in the picture above grid- should be +
How about this.
Here you can see measurements from the different power grid meter and EM24 at about the same time.
My power meter is measuring every second when EM24 shows numbers every 3-4 seconds.
Just to update.
There was a simple reason for the wrong numbers.
Problem was fixed by swapping phases L1 and L3 on the LM24 power meter.
Below the numbers after fixing this problem.
