For some time I've noticed my inverter give overload warnings. On investigation I found that if my load exceeds the inverter capacity, let's say 5000W then I have an overload warning even when the grid is connected and solar producing power.
My configuration is:
Grid Connected
Quattro 5K, 481
RS450/100 producing +-3000W
Load +-5000W
Battery supply remaining +-2000W
Grid supplying some watts, minor values though.
Both ACOut1 and ACOut2 in use as per normal No Grid Failure scenario.
Why would the inverter give an overload warning when it's maxed out on Inverter power but the connected grid is still connected to provide 'top-up' when needed?
We all know the inverter is at max so while the grid is connected I don't really care. When the grid is NOT connected then YES, then I need to know about it. Can that setting not be amended to not warn me on a daily basis that my inverter is working hard for it's money?
Ingo