This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The BMV 712 requires a firmware update before I can use it. However, despite being able to connect to it on both my Android and iPhone, it fails the update at 4% on both devices. It gives the result B6 "the product did not activate its bootloader although it should have."
Tried over and over with no luck. Not feeling good about this very expensive brick. Any advice greatly appreciated.
Hi,
Can you please make a service report on the Android phone of when you try to update the BMV? The procedure is described here: https://ve3.nl/VictronConnect_How-to-create-a-VictronConnect-Service-Report
Please attach this service report in a comment on this topic using the "upload file" icon when writing a comment.
We can then look in this Service Report to get a better idea of what might be the problem.
Kind regards,
Thiemo van Engelen
I was able to update the firmware by purchasing the VE Direct cable, which for some reason when connected to my computer allowed the BMV712 to update via my phone (random). HOWEVER, my SmartSolar 100 | 50 doesn't show up at all. I updated it's firmware, also using the VE Direct cable, and configured it, but it doesn't show up on my android phone at all, even though the BMV712 does now show up and is accessible. I've generated a 'service report' from the SmartSolar 100 | 50 using my laptop and the cable... it's attached. SmartSolarServiceReport.log
Hi,
Can you please also make a service report on the Android phone after starting VictronConnect and staying in the main menu for a while, as this might tell us a bit more on why the MPPT is not visible on the phone?
Kind regards,
Thiemo van Engelen
