So my battery is 100% charged but the orion is stuck in absorption mode, it never goes to float!
This isn't correct is it? I've literally been driving about for 2 hours and now again I will get this engine shutdown detected screen for 30 seconds (even though im driving lol) then it will go back to the absorption mode....
What could be the cause?
Ive attached pics of my install in case something is obvious with the setup
I have the following :
Victron 12|12 -30 Orion Tr Smart
Victron MPPT 100 | 50
Victron BMV 712 Battery Monitor.
2 x 12V 200AH Xtreme AGM Leisure Battery (XR3500)
I'm worried its all setup wrong and damaging my batteries :(
Any help would be greatly appreciated!
Best
Nick
