question

cpurchas avatar image
cpurchas asked

Cerbo GX Touch 50 Display information

Hello All,

I have been digging through my Cerbo GX settings trying to find a way to display data from both of my PV controllers on the main screen. I found this image online that shows exactly what I'm trying to do.... Any idea how to get this additional data to appear on the display as shown below?


screen-shot-2021-05-30-at-124027-pm.png

cerbo gxgx device
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

I'm pretty sure this is a modified UI. Take a look into the modification space.

https://community.victronenergy.com/spaces/31/index.html

0 Likes 0 ·
markus avatar image markus ♦♦ commented ·

I think this question is better suited in the Modification space.
So I move it there.
BR

0 Likes 0 ·
3 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

The image is someone's use of my "GuiMods". It provides this and other functionality such as tank and temperature info along the bottom of the screen, power gauges for AC in/out, inverter, battery. A power gauge for the PV Charger was also just added.

If you add names to your PV chargers, those names will appear where -- are in the image above.

https://github.com/kwindrem/GuiMods

You will also need SetupHelper for the install

https://github.com/kwindrem/SetupHelper


29 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cpurchas avatar image cpurchas commented ·

Thanks Kevin, that adds exactly the functionality I was looking for... Problem is, I'm no programmer and looking at your instructions gives me a headache, I have no clue what to do. Any possibility of me hiring your expertise to make the code changes for me?

0 Likes 0 ·
Kevin Windrem avatar image Kevin Windrem cpurchas commented ·

I can certainly help you get this going. There is no code to write, just installing the package and running a setup script.

If the Cerbo is connected to the internet, then the easiest thing to do is enable superuser and SSH login and run a couple of commands:

wget -qO - https://github.com/kwindrem/GuiMods/archive/current.tar.gz | tar -xzf - -C /data

mv /data/GuiMods-current /data/GuiMods

wget -qO - https://github.com/kwindrem/SetupHelper/archive/current.tar.gz | tar -xzf - -C /data

mv /data/SetupHelper-current /data/SetupHelper

/data/GuiMods/setup

Select install at the first prompt, then proceed to answer all the questions.

There are ways I can simplify the installation process for you but would need to collect information about your system.

My package will reinstall itself if possible but future versions of Venus OS may require repeating the installation steps.

0 Likes 0 ·
cpurchas avatar image cpurchas Kevin Windrem commented ·

Pardon my ignorance but all I need to do is enable superuser and SSH then type in that list of commands you posted? The Cerbo is connected to the Internet full time via cellular / WIFI on my boat.

0 Likes 0 ·
Show more comments
dereppsteiner avatar image dereppsteiner commented ·
Hello Kevin. is it necessary to install the setup helper? or do I just have to proceed like the installation description in the readme file? 
Superuser is running on my device.
0 Likes 0 ·
Kevin Windrem avatar image Kevin Windrem dereppsteiner commented ·

Yes, you need SetupHelper for any of my packages and for the other packages starting to use it like the 123electric SmartBMS.

I just checked and the GuiMods ReadMe is out of date. The ReadMe also includes manual download/install instructions, but these include installing SetupHelper as well. At one point, SetupHelper and GuiMods were installed via the blind install mechanism. I eliminated GuiMods from the blind install since you get the same functionality by adding the GuiMods .tar.gz file to the same media.

The install instructions in SetupHelper detail how to install other packages on the same USB stick/SD card as used for the SetupHelper blind install.

There are two parts to SetupHelper:

First, it provides functions that all of my package setup scripts use. These functions simply the setup scripts.

Second is automatic updates from GitHub or from USB/SD media, and reinstall after a Venus update. V4.0 switched this functionality to PackageManager which is part of SetupHelper.

You can technically disable PackageManager if you only want command line based install/uninstall. But you would need to edit the SetupHelper setup script to do so.

You can disable the functionality PackageManager provides by setting automatic download and automatic install off. You'd also want to avoid inserting an SD card with any package .tar.gz files on it into the GX device.

The command line based install/unstill still works although it is not documented in the ReadMe documents. Just run the setup script one the package is manually placed in /data, e.g.,

/data/SetupHelper/setup
/data/GuiMods/setup


0 Likes 0 ·
dereppsteiner avatar image dereppsteiner Kevin Windrem commented ·
Thank you very much Kevin. 
Is there also the possibility to restore the system after a flash error or blue screen? Unfortunately I'm not a computer genius and I'm a bit scared ;)


0 Likes 0 ·
Show more comments
jsrivet avatar image
jsrivet answered ·

@Kevin Windrem Can you go follow this link there is a bug that has been found thank you https://community.victronenergy.com/questions/114259/venus-os-large-features-menu-missing-on-28033large.html?childToView=114415#answer-114415

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kevin Windrem avatar image Kevin Windrem commented ·
Should be fixed now
0 Likes 0 ·
dereppsteiner avatar image
dereppsteiner answered ·
Thank you for your work Kevin. since the past weekend the gui mod is running perfectly
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources