question

dag avatar image
dag asked

MTTP 75/15 not charignig

My MTTP has stopped chargin

Solal terminal shows same voltage as battery. When I dissconnect the panel, the panel has an output og 19 V. When connected the voltage is the same as the battery.

All connections and cables seems ok.

Dag at Sailboat Ruske 2


MPPT Controllers
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
netrange avatar image
netrange answered ·

Maybe the batteries Are full ... At about 14.4 volts ... + 5 Volt mppt higher starting Voltage ...the mppt won't start any charging ...

How many Panels are connected ?


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dag avatar image
dag answered ·

Hi, the battery was at. 12,5 V

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sacjec99 avatar image
sacjec99 answered ·

I have exactly the same problem, installed it a week ago and so far it’s never worked

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

netrange avatar image netrange commented ·

Sounds like a Problem for some of the 75/15 chargers ...

The mppt should start working if there is a load connected to the Batterie ... When enough Solar Voltage is connected to the system ...

0 Likes 0 ·
dag avatar image
dag answered ·

I have 1 panel connected.To «netrange»: AGM batteries have a Max voltage of approx.. 12.85 volts

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.