Trying to use Victron Connect via the VRM tab and it hangs up on the "connecting" at 40% and then times out with an "unable to retrieve" message
I can access the system via VRM normally, see all the devices in the device list, run the Remote Console, all the usual things, but just cannot connect to any VE.Direct devices via Connect/VRM.
Tried rebooting the Cerbo but no difference. Also tried running Victron Connect from Windows PC, Tablet and Phone and identical results - hangs up on 40% and then times out.
Is this a local installation issue or VRM system glitch? (worked fine always until today).