Hi dear community, I know this question has been asked before, but I didn't see any answers. I want to check whether the thermal breaker has tripped on a Multiplus Compact 24/2000 at one of my clients´ installation. The charger is not taking the generator input and I have already done all the recommended generator parameters adjustments on the Multiplus via Remote Config. The problem has to be something else. The manual says to reset the thermal breaker if the charger is not working, but the front plate of the Multiplus does not have any sign of a breaker. It must therefore be on the inside I presume. I am not physically close to the installation, so I want to guide my customer on how to do it.
Thanks for any pointers.