I have new 200ah lithium batteries I torqued to 19ft/lbs but worked lose
What’s correct setting
Thanks
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have new 200ah lithium batteries I torqued to 19ft/lbs but worked lose
What’s correct setting
Thanks
My Battle Born LFPs specify 9-11ft/lbs torque on terminal fasteners. The nuts have a nylon insert that helps prevent loosening. Suggest you get some and try out, or also lock washers, or serrated nuts to fit the bolts. All should help prevent loosening due to vibration..
Hi @Sea1ravdn,
because this is Victron territory, I guess you're talking about the Victron Smart Lithium 12V or 24V 200Ah battery.
It's in the manual, Section 4.6
Additional resources still need to be added for this topic
28 People are following this question.
VRM Battery history [ BMV-712 Smart] widget - "Time since last full charge" with wrong value
What happens when BMV712 sees charging beyond 100% SOC?
BMV 712 partially clear history data
bmv 712 wiring for 48v with mid point
BMV 712 not reseting SOC to 100% even after MPPT 15/75 has reached fully 100% SOC