This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have CerboGX and Touch 50. It was working fine, but not when it boots up the display is zoomed so the whole display does not fit on the screen, and it is not responsive. The only think that I've done since it was working is turn it off, unplug the connectors and reassemble everything. I also tried to connect to the local wifi using my iphone but it failed.
Ok, I moved the antennas in the CerboGX as recommended because WiFi didn't work with Touch 50 as mentioned in another post.
I also remounted the CerboGX to take some stress off the HDMI cable. Anyway it seems to be working again.
Thanks for the update.
I have seen this issue before and it is resolved by rebooting the Cerbo GX numerous times until it is corrected.
