question

joergd avatar image
joergd asked

Since the last firmware update of the MPPT 150/35 via the VictronConnect app, the controller disappears from the color control several times an hour.

It then takes a few seconds until it reaches full charging capacity again. Has anyone observed a similar behavior or even has a solution ready?

System Info: MultiPlus + MPPT 150/35 + ColorControl + Pylontech LiFePO4

MPPT SmartSolarCCGX Color ControlVictronConnect
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) avatar image Thiemo van Engelen (Victron Energy staff) ♦ commented ·

Hello joergd,

Is the Color Control connected to VRM and is remote support enabled? If so, do you mind giving the site name so we can log in on the system to see what might be causing the problem?

Kind regards,

Thiemo van Engelen

0 Likes 0 ·
0 Answers