There is something very odd happening here, even though the system works ,there is no data for current and power in the VictronConnect App status the firmware has been updated to the most recent version .I am able to determine that the system is working because if you look at the history, all the data is there however status is zero.
Has anybody encountered this before?
What is the solution? comments and suggestions are welcome
The details of the installed system are
24x 250w Trina solar polycrystalline solar panels
1 X 5KVA Victron energy Multiplus inverter 48v 230V
1x 150/85 Tr VE CAN MPPT Controller
12 X 12v 200ah Lead Acid batteries