My out shows 10kwh, I've no idea what normal should be? any help
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My out shows 10kwh, I've no idea what normal should be? any help
Not really enough info here. I assume that is the lifetime total? The current output power is measured in Watts on the circular gauge on the app. With 200w of PV you will probably not see much above 150w, unless the temperature is low and the panels are exactly facing the sun. Also the MPPT will only give what is needed (up to max available) so if the battery is fully charged, the watts readout will drop off until a load is applied and the battery voltage drops. (slightly different if you are using the load output function or direct battery connection) Post a picture as suggested below for a better answer.
MPPT 150/60 up to 250/70 Manual
Additional resources still need to be added for this topic
46 People are following this question.