I have an off-grid system with a Multiplus 2 , two Bluesolar Mppt 150/35 and 8 Pylontech batteries US2000Plus. Yesterday the Color Control GX stopped working (first it showed wrong values, then I tried to reboot but it remains with the "Victron Energy" start display).
As the Mppts stopped to charge I disconnected them from the CC and reset them with the parameters for Pylontech batteries. Now they charge correctly, short time after 100% SOC they change to absortion modus, and the Pylontechs go standby when fully charged and if there´s no load. Also the Multiplus works properly.
Can I continue to use the system in this way without any GX device or should I better shut it down until the new CC arrives?