question

Gary Pacey avatar image
Gary Pacey asked

Multi Control from Cerbo Touch 50 Home Page

The most common operation on a mobile system is to control the multi - Off, On, Charge Only and Inverter Only. With a Cerbo Touch 50, it requires finding the multi and then into the switch section.

It would be great if the Multi switch control functions were available as a popup on the home screen. Simply touch the Multi icon and control the state by a popup selection.

MultiPlus Quattro Inverter Chargercerbo gxswitch
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Gary, this screen has exactly those functions:

19441-1619765736295.png


Enable it in Settings -> Display & language:


1619765776471.png


12 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

leverg avatar image leverg commented ·

I think Gary means you can turn the Multiplus on and of or in charge mode from the home screen ?

Instead of going though the menu, choose multiplus and then enable charging, both or off.


0 Likes 0 ·
Show more comments
Mark avatar image Mark commented ·

The pump switch,doesn’t seem to work in manual mode!

0 Likes 0 ·
laurenceh avatar image laurenceh commented ·

The Control of my multi switch does not seem to work on my system from any screen. I can see this but can’t change the state.

1619850152801.jpeg(Currently I left the multi switched off because I’d did not have remote control)

Do I need to configure anything in the multi to enable remote control?

0 Likes 0 ·
1619850152801.jpeg (152.2 KiB)
Show more comments
Kevin Windrem avatar image
Kevin Windrem answered ·

I considered adding inverter control to the "flow overview" (aka home screen). I had also considered setting AC input current limit as well. In the end, I decided a tap on the AC input tile to set current limit and a tap on the inverter to set it's mode would conflict with a swipe to change overview screens. The "tile overview" has a similar behavior in that a swipe on the bottom of the screen scrolls to a new set of tiles while a swipe on the top changes overviews so I may be overreacting.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.