question

itsme avatar image
itsme asked

GX Tank 140 with Venus OS on Raspberry?

Hello,

does the new GX Tank 140 work with the Venus OS on the Raspberry pi? I have Firmware 2.66 on a Raspberry pi 3+ and I cannot see anything that has to do with the GX Tank 140. It's connected via USB.


Venus GX - VGXRaspberry Pi
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
itsme avatar image
itsme answered ·

Well - here's the answer by myself:

I've installed release candidate 2.70-6 on a new SD-Card. It's not possible to update from 2.66 to 2.70!

After install and basic setup (WiFi) - GX Tank 140 plugged into USB port and baaaaam: All sensors available and analog inputs as well!

Great Work. Thank you.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

igorvanlife avatar image igorvanlife commented ·
Hi, Today I plugged in my new gx tank 140 to RPi4 with v2.90 ~8 and there is no connection between them. No Tank gx on device list and no sensor information. Have you changed any settings or just plugged it in??

Thanks

0 Likes 0 ·