question

Rune Eilertsen avatar image
Rune Eilertsen asked

Smartshunt / bmv - calibration info in config file make problem for factory deployment..

Save a config for shunt we discovering has calibration settings together with config settings.

That meaning we can not make a master config to deploy on all other machines we fabricate. (But instead must type it in manual, with the chance of mistyping )

BMV Battery MonitorSmartShunt
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

hi @Rune Eilertsen, so! It turns out you were 100% correct. And a beta version of VictronConnect that fixes this is now available to field test. Planned for official release next week. There is a bit more to it, I’ll contact you latest next week since I have a few days out of office first.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Rune, I already heard back from the developer, and this was checked recently. It doesnt copy over the zero current calibration.


What makes you think it does?

Did you test it? Ie (mis)calibrate one shunt while a current is flowing, then save it, restore it to another smartshunt, and see that it messes that second one up.

8 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

@Rune Eilertsen what makes you think that it does reset the zero calibration?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic

Victron BMV battery monitors product page