question

james-davy avatar image
james-davy asked

Is Relay 1 (for starting a generator) on the Maxi GX potential free?

I would like to start a generator using Relay 1 on the Maxi GX - is the Relay 1, potential free? Sorry probably quite obvious, just want to be sure.

Thanks

Generator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
james-davy avatar image
james-davy answered ·
Just to give some feedback on the above question I asked, I have been told on good authority that that the Relay 1 on the Maxi GX is volt free. I will test this coming week and give some feedback.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hmurmur avatar image
hmurmur answered ·

How are you connecting the wires to Relay 1? Do you insert the wire into the bottom opening? are you using a ferrule?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pwfarnell avatar image pwfarnell commented ·
I use bootlace ferrules on all my Cerbo GX connections for relays, digital inputs, temperature inputs, power etc.
0 Likes 0 ·