question

dreww avatar image
dreww asked

Lost functions- CCGX and VeBus BMS can't use remote on/off.

Using Victron 300 Amp/hr Lithium + VeBus BMS. Can no longer turn Multiplus 2000 on/off or adjust in AC (Hybrid mode)- which is a great feature. CCGX now shows feature disabled and controlled by BMS. All firmware up to date.

Anyway to override? Really want to use small genny + battery to run higher AC loads.


BMSCCGX Color Controlinverter current draw
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @DrewW,

Sorry to say this is a limitation of the VE.Bus BMS system - there is no work around - except to use the additional physical Digital Multi Control accessory.

Apologies, but if there was some other way with the software, it would be so.

There is a some more detail here in the CCGX manual, under "VE.Bus systems with Lithium batteries and a VE.Bus BMS.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tmartin000 avatar image tmartin000 commented ·

So, its one or the other? ..... ColorGX or Digital Multi Control accessory?

0 Likes 0 ·
Show more comments

Related Resources