This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
After setting up my system in my workshop and having the battery percentage showing in the bottom left corner of the GX Touch 50 I have now installed it into my 5th wheel trailer and no longer have the percentage showing. What part of the system supplies that? The possibilities I have are the 500 Amp Smart Shunt, the Smart Battery Sense, VE.Bus Smart Dongle, Smartsolar MPPT 150/70 and the Multiplus 12/3000/50. Any ideas on how to get that back?
Hi @rlp84070,
go to Settings/System Setup in your GX device and switch "Has DC system" on.
Thank you, it took a bit but I found it and it is working now. Thanks again for your help.
The possibilities I have are the 500 Amp Smart Shunt, the Smart Battery Sense, VE.Bus Smart Dongle, Smartsolar MPPT 150/70 and the Multiplus 12/3000/50.
Use the SmartShunt.
Settings-System setup-Battery Monitor.
It took me a while to find where you were talking about but I finally found it and it is working now. I just need to get more familiar with all the settings because I do remember seeing that setting before. Thanks so much for your help.
