question

Bill avatar image
Bill asked

Just wanted to give Kudos to the Developers after they fixed the BT range on the Smart Battery Sense!

When I first added the SBS last December, my SS 100/50 controller could not connect to the SBS unless I left both the RV compartment doors open. After one of the last upgrades, that is no longer the case, my 100/50 sees the Battery Temp and Voltage with the doors closed!

Yahoo! -Bill


Its not good to leave the compartment doors open while driving... :)

BluetoothSmart Battery Sense
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Thanks for the Thanks!

I’ll pass on the message to the tirelessly working firmware team that you are enjoying the updates :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas H. Clancy avatar image
Thomas H. Clancy answered ·

Maybe they can do the same for the BMV712 ?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas H. Clancy avatar image Thomas H. Clancy commented ·
And one of my mppt chargers definitely has a lower output then the rest, doesn't exchange data with the smart network, is continuously loosing connection. Ofc out of warranty.
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Smart Battery Sense Product Page

Smart Battery Sense Manual


Additional resources still need to be added for this topic