question

Topper avatar image
Topper asked

Phoenix Multiplus 24/3000 sinewave starts clipping at half load

Hello,

I have a Phoenix Multiplus 24/3000/70 old model and when it's turned on and there is no load on the output the sinewave has a nice curve see next photo;

no-load.jpg
But when i put a load of 1600W on the output the sinewave starts clipping, see next photo;
half-load-1600w.jpg

Is this normal for a older version of this Phoenix Multiplus or is there something else wrong?

Thanks in advantage for any reaction.

MultiPlus Quattro Inverter ChargerPhoenix Inverter
no-load.jpg (232.8 KiB)
half-load-1600w.jpg (185.7 KiB)
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

What kind of load? What about the battery voltage at this moment?

0 Likes 0 ·
Topper avatar image Topper Matthias Lange - DE ♦ commented ·

@Matthias Lange - DE The load is a water cooker, with no load the battery voltage is 24,0V with the cooker on the battery voltage is 22,4V

0 Likes 0 ·
Show more comments
0 Answers