This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Look at these graphs
This is my setup
- BMV712
- Venus GX
- A solar charge controller from another vendor. Attached through the shunt
- Multiplus (which is off)
The batteries are in good shape, but the SOC - taken from the BMV - displays some strange numbers. What could cause this?
t.
Usually it's wrong connections or wrong settings.
do you have pictures of the installation?
and what settings have you used?
from the voltage I'd say your battery is 100% charged all the time.
I like those charts, what is producing those? The BMV, GX or something else? -Bill
