This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
From one moment to an other the module does not let any current go by.
the panel side shows 40V. The battery side anything but far off the actual.
I did a Factory reset using the App. No change.
I disconnect the batteries as well as the panels. No change.
what els do you recommend to do/check?
Have you had a really good look at the fuse/circuit breaker between the mppt and battery?
Your min battery voltage looks odd, and max batt voltage as well, plus no cumulative output.
Also having the same problem with a 75/15 !
The regulator is stuck on float.
Can you post some pics of the settings pages?
The absorption voltage seems pretty high. What type of batteries and configuration do you have?
