Hi, I've tried to word this question several times and never get an answer. I'll try again.
I have 3000/12/120 (230) MP connected to 400ah lithium bank and 2000W Isolation Transformer.
I'm getting an issue with high loads (well within the limits) when on shore power (I have the multi control limiter set to 8.0A to be conservative).
So for example 9 times out of 10 when the kettle (2000w) is turned on it's fine. However every now and then you see the red overload light flash and I get an email alert via VRM emailed to me.
I've tired with shore power off and never get this on just the inverter alone, so I think there is an issue with power assist, but no one can confirm or deny that, so I'm a little stuck.
Planning long term cruise on the boat, so don't feel happy with this - even though I won't be using shore power much. I would like to know the MP has no gremlins before I set sail.
Hope someone out there can help with this!
I've checked all of the maximum power inputs on my appliances and the highest is the microwave oven that can pull 2600W. I think the max peak on the MP is 6000W, so with shore power on I don't see why I'm getting this over load warning.
Regards,
Michael