Does the Relay Assistant in a MultiPlus Compact (aka Phoenix 12/2000) continue to work after low SOC shutdown?

Hi there,

I would like to be able to turn a MultiPlus Compact (Phoenix 12/2000) off when reaching a defined SoC. This part is easy. I would however also like to continue to use the programmable relay in the same MultiPlus to turn off DC loads via a Battery Protect when the SOC reaches a (lower) threshold. In other words, what I have in mind is turning off AC loads at say 25% SoC and turn DC loads off (relay driving a Battery Protect) at 15% SoC.

Is that possible?

Jan

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ulrich commented · Mar 29, 2021 at 06:40 AM

Hello Jan,

that's a really good question. A BatteryProtect is always installed in the circuit diagrams. Don't you just like to try it out?

I am very curious to see if someone is already using it in this way.

greetings