I have a BMV-712 monitoring (3) SuperPack 200Ah Victron Batteries.
Currently, the phone app is showing the batteries have an 82% state of charge but the voltage is 12.94V. I talked with tech support where I purchased the batteries and have confirmed that the BMV is setup correctly and that I need to use the batteries for the BMV to accurately indicate state of charge. We have been living in our van for more than month.
Why is the BMV showing 82% state of charge but the store where I purchased the batteries noted that the DC Input low alarms pre-alarm for the attached Multiplus should be set at 12.0v and DC Low Input-shutdown is 11.80?
Thank you!