This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
By overvoltage are you referring to overvoltage from lightning? You can ground the array.
You would need DC Surge Protection Devices for that. Example linked.
But as for panel voltage, 250v at minimum temperature for your location is the hard install limit for the mppt. You would need a pretty decent DC isolator for that as well.
Hello, thanks for your answer.
Yes exact - overvoltage from lightning.
Can you reference me an DC Surge Protection (type) Devices that fits to my BlueSolar 250/70-Tr - i guess it shoud have a voltage of 250V?!
DC isolator shoud be no problem - my Setup is:
PV Panel, Fuse, Overvoltage Protection, DC isolator - so the DC isolator is protected from the fuse.
How are you combining your strings? Is each string dc fused?
Sometimes just buying a pv combiner box for the number of strings and pv power you have is simpler than sourcing all the parts.
I am about to install same SmartSolar 250/70. Here in Germany, we are leagally obligated to install a DC surge protector. (If the cable is longer then 10m, we need actually two, one at the combiner box and one near charger).
Can someone tell me a surge protector rated for 250V DC?
