question

sailwatch avatar image
sailwatch asked

Easy Plus 230V installation in RV Camper Van

Hi. I bougt an Easy Plus 1600 Inverter. Unfortunately i dońt get any support from my dealer (greenakku.de) so íll try here...

Actually the 230V system Setup should be quite simple... but to be sure i need some help.

(insatllation mobile in a Camper)


is it sufficient to connect the AC in correctly (GND, N, L1) and the AC 1/2/3 correctly to the users and add one Ground wire to the chasis of the car from the bolt on the Easyplus.

Thats it?! Or do i have to add any additionally safety.

Thanks for help!!

EasyPlus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
djrmml avatar image
djrmml answered ·

Its adviced to put a breaker after the inverter.

Also read the easyplus manual, page 11 (EN) for more information on the 230v side.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sailwatch avatar image sailwatch commented ·

Hi, thanks for the reply. Where would you put a breaker? In the 12V part i‘ve installed a 200A breaker... but the 230V part additional breaker?

My question was refering more to the ground wiring... (what do i have to connect to the chassis of the car, only the bolt of the housing of the easyplus?)

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic