Hi everyone,
At the moment I am designing my (Victron) electrical system for our 4x4 campervan. Everything ok, but concerning the Victron charger, I am a little bit lost.
Here are the specs I am looking for:
- Input 110V AND 230V
- Profile for charging Lithium Batteries. (I will probably install a 12V/200Ah)
- Smart
- No need for 230V sockets in the campervan. Only 12V. So a charger/converter is not necessary.
To match this profile, I only found the chargers Phoenix, Centaur, and Skylla with an input of 110V AND 230V. And only the Skylla has also a profile for Lithium and is 'smart'.
So, at first I choose the Skylla IP65 12/70 (1+1). But looking at the specs, this charger is recommended for battery-banks with a minimum of 350Ah.
So my question is: Although it will probably be overkill, can I connect the Skylla to my batterie-bank of 200Ah without harming or damaging my batteries?
Or does anyone have another solution? Am I overlooking something?
Thanks in advance!
Kees
