question

llubi avatar image
llubi asked

VE.Smart in VRM / GX Device

Hi,

Is it possible to see the ve.smart data in VRM or in the GX device? I just bought 2 smart battery sensors to monitor remotely 2 batteries that are about 5 meters from my Cerbo and it would be great if I can check them online. As they are not part of the system, I don’t want to fit BMV or Smart Shunt, just check the voltage.

Thanks!

cerbo gxVE.Smart Network
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

HI @llubi,

Sorry but no.

The VE.Smart network is not compatible with the Cerbo GX.

You can see the list of devices that are VE.Smart compatible here - https://www.victronenergy.com/media/pg/VE.Smart_Networking/en/ve-smart-product-compatibility.html

I will update the documentation to make this situation clearer.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

llubi avatar image llubi commented ·

Thank you Guy!

I will keep watching just using the bluetooth app, and waiting for if the future makes it available.

BR,

Albert

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ llubi commented ·

The hardware is in place, so it is technically possible that it could be enabled with a future firmware update. No plans for that at this stage though.

0 Likes 0 ·
Show more comments