question

j-n-dale avatar image
j-n-dale asked

Can Color GX use Wifi for remote VRM comms and wired LAN for direct comms to SolarEdge HD Wave

My system has a Multiplus 2 with color GX and SolarEdge HD wave solar inverter.

I can successfully connect to remote VRM using the recommended Asus USB-N14 Wifi router.

I can also conect the SolarEdge to the Color control via wired LAN.

Can I enable both interfaces to work at the same time. The Wifi is intermittent at this location so I want to use the simple (reliable) LAN connection to the SolarEdge and then use the unreliable Wifi for remote VRM updates.

Is there only one ethernet stack in the Color Control which can only be switched to either Wifi or LAN or is there a way I can enable both, but with only the wifi being used for remote VRM use?

Regards - Jeremy Dale

Multiplus-IICCGX Color Controlwifisolaredge
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, probably it can, as long as you make sure there is no default gateway set for the LAN.

You can do that by manually configuring an IP (and not setting the gateway) or by making sure the dhcp server (typically a router is used) on the LAN leaves the gateway unset.


To make sure, you’ll have to test it I’m afraid.

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

j-n-dale avatar image j-n-dale commented ·

I had already set the LAN connection to manually connect with the SolarEdge (see below)

20210318-180458.jpg

This works well but as soon as I connect the Wifi by plugging in the ASUS Wifi dongle, the LAN connection is dropped in preferenece to the Wifi.

When I unplug the Wifi dongle, the LAN reconnects and the SolarEdge data displays on the COlor Control screen.

Below is the Wifi conenction details

20210318-181928.jpg

Does the configuration look viable. Any suggestions?

Regards - Jeremy Dale

0 Likes 0 ·
20210318-180458.jpg (1.0 MiB)
20210318-180458.jpg (1.0 MiB)
20210318-181928.jpg (1.4 MiB)
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ j-n-dale commented ·

Hi Jeremy, what do you mean with the LAN being dropped? Can you send a photo of the ethernet menu at that time?

0 Likes 0 ·
j-n-dale avatar image j-n-dale commented ·

Added extra info above - not quite used to the chat format - new user!

Regards - Jeremy Dale

0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ j-n-dale commented ·

Hi I dint see what you added? To add just hit reply and add a comment with the new info.


also just now I noted that you manually configured an address in the link local address space. 169.254.

Better dont do that, the GX will already have one by itself.

0 Likes 0 ·
Show more comments

Related Resources

CCGX Product Manual

CCGX Product page

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes

Integrating with SolarEdge

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic