question

pim avatar image
pim asked

Inputs Cerbo GX suddenly stopt working

Hello everybody,

A few weeks ago I’ve installer a Cerbo GX with some tempsensors and Tankmeters. This worked fine (data still visible in VRM) but today all of a sudden all inputs stopped working (not visible anymore under “devices”). Everything else works fine (ve.direct devices like a mppt and shunt are still visible and upload to VRM also works fine).

Seems like a hardware-failure on the input-side (I’ve tested all 4 tempinputs and all 4 tankinputs, none of them works).

Somebody here with the same issue?

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Warwick Bruce Chapman avatar image
Warwick Bruce Chapman answered ·

What version of Venus OS was it running when it was working, and what is it running now?


Please go to "Settings" on you Venus device, then IO, then Analog and take a screenshot. If they are disabled, you might try enabling them again.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pim avatar image pim commented ·

Same and latest version: 2.63. I've installed it a few weeks ago and did not change anything. The meters are enabled but no info since 2 days....

0 Likes 0 ·
Show more comments