All of a sudden, i went to touch my display and no output. I unplugged & replugged the usb into a different one reseated the HDMI, rebooted the Cerbo GX. Nothing no output.
asked
My GX 50 touch screen is dead after 2 weeks.
Get in touch with your dealer for a replacement.
Yes, good suggestion, I tried another new touch screen it also has the same issue. It would suggest that the Cerbo GX is the culprit.
out of interest: were you using an extension cable?
A long shot, but use the Remote Console and check if the screen brightness is not all the way down.
I don't have a display, so I don't know how dark it gets at minimum, but this is easy to check.
Thats a great suggestion, however there is no screen brightness adjustment.
In Cerbo GX, go to Settings - Display & Language and there you have a slider to adjust the brightness:
Strange.
Anyway, increase the "Display off time" and see if that changes anything.
What firmware version is in your Cerbo GX?
I have the same problem; so removed the Touch from the (indoors) EMS panel, plugged the Touch to the Cerbo. Panel lit up with limited info on screen, but did not respond to touch. If the culprit was the (2) extension cables, would it not power up and operate when connected to the Cerbo directly?
John
Hi have this same issue - I'm about to get the touch replaced, but reading this, is it more likely that it's the GX that is broken?... As a bit more info, if you shine a really bright light on the touch screen you can see the display is actually working, it's just there is no brightness... Also, just to confirm the same issue as others - all the brightness settings have gone from the menu. I've also tried different firmwares
I have the "same" issue... the GX Touch screen is black but the touch seems to be working as I can see the screen working when viewing the Remote Console. My firmware version is v2.80.
Did anybody sort it out? Is it the GX Touch screen or the CerboGX?
any solution to this problem? After 5 months using it today the screen has remained black. The brightness adjustment menu has disappeared, any solution?
Please try/check the cables.
obviously I don't send a question if I haven't checked the cables. Also it seems that there is a problem since I am not the only one that is happening.
just installed one & have an issue with PART of the creen not touch sensitive
the line REMOTE CONSOLE is Not selectable same on other screens in the same area tried rebooting cerbo reconnecting etc no difference
contacted dealer who says ther are no issues with screens & (if I return and its not at fault its going to cost me) but returning as its a fault somewhere as I managed to get vrm setup with WiFi then set all the settings via VRM on reading this now wonder if i have blamed the correct device cerbo maybe ?
Hi there,
I have the same problem on my GX 70 touch...Updated the firmware to v2.92. My problem is that it's kind of glitchy, slow response time, not the fastest touch screen, is this normal?
Also my arrow button (back) does not work!!! This is really frustrating because I have to hit MENU every time I want to go back, and it brings me back to the main menu, is this normal that only the arrow doesn't work? I also don't have the function with the display and language...
I'm worried that my touch screen is partially not working, although that really does not make sense...could it be the cerbo gx harware problem?
