question

mihair avatar image
mihair asked

Is it possible to connect in parallel BlueSolar with SmartSolar charge controllers?

H,


48V ESS system with one Multi 5000 and BlueSolar MPPT 150/35 needs additional SmartSolar 100/20 charge controller.

Is this a valid configuration?


Thanks,

Mihai

ESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

If you mean to connect the 100/20 to a GX device with VE.Direct cable then yes, that will work.

Make sure that the 100/20 that you have is a 48V version, some older ones were only capable of up to 24V. The 24V version is no longer produced, but it is best to double check.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mihair avatar image
mihair answered ·

Thank you.

One more question, please. How controllers will appear on Overview page, as a multiple tiles, one per each controller, or as a single tile with cumulated produced power?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

Overview page shows a single tile called "PV Charger" with all MPPT charge controllers' cumulative power.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic