question

llubi avatar image
llubi asked

Cerbo GX relay #2 current

Hi!
My Cerbo is fitted in a van, with some exterior lights. These lights are connected to 4 relays that control each of the sides of the van. With an internal screen, I can send 12V to activate the relays and light on the lights.

My question is if I can put a +12V to the common port on the #2 realy of the cerbo, and the connect the cerbo to the same internal screen, to activate the lights from the Cerbo. Will the Cerbo have a problem if the current from the other screen goes to his #2 realy? Do I need a diode or something in the middle?

Thanks!


Albert.

cerbo gxcurrent limit
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

https://www.victronenergy.com/live/venus-os:start
DC up to 30VDC: 6A
DC up to 70VDC: 1A
AC: 6A, 125VAC

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

llubi avatar image llubi commented ·

Sorry, I did not explained myself :(

I need the relay of the Cerbo to control another relay, but this relay is already being controled, so I'm not sure if the current will flow backwards to the Cerbo and broke something, or maybe I'm just thinking too much...

0 Likes 0 ·
Show more comments

Related Resources

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document

Additional resources still need to be added for this topic