question

n-dee avatar image
n-dee asked

MPPT VE-CAN not reporting correctly to VRM-Portal

Hi,

I've got two SmartSolar MPPT VE.Can 250/85 rev2 with Firmware 3.04
One of them doesn't correctly report to VRM (see screenshot)
Deleting it in VRM doesn't help.

What can be done?

mppt-false.png

MPPT ControllersVRM
mppt-false.png (18.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @N-DEE

What GX device / firmware are you running?

What is your VRM-id or -url?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

n-dee avatar image n-dee commented ·

Hi,

2.65-3 and mppt is shown correctly in Cerbo.

ID 58337
(Also tried to rename it already from "SUED 2" to "SUED II" which doesn't help)

Feel free to investigate / configure / restart / etc.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual