question

nimanama avatar image
nimanama asked

Will it be safe to use a 330W 19.5V 16.9A laptop charger for my 100/20 controller?

I have seen online people rewiring laptop chargers for their MPPT controllers, and I'm assuming that I can use a charger which has 16.9A. It would be very useful for me as this setup is in my van, and being able to swiftly disconnect my PV and connect a charger to the same input would be great.

It seems it would work but there is always a space for the unknown so thought I would post here. Besides I also saw something online that suggest that the controller could try to pull in more power of the laptop charger and would go into overcurrent. Anyone to validate this?


Thanks in advance!

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
porcini avatar image
porcini answered ·

No problem at all, but you should limit the charge current to 15A when doing this and the mains adapter should have a short circuit and temperature protection.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nimanama avatar image nimanama commented ·

Great. Good to be assured.

Shouldn't most adapters have this short circuit and heat protection?

0 Likes 0 ·
Show more comments