I have a victron 48/5000/70-50 multiplus running a Redflow ZCell which stopped working (No power from UPS circuit).
LED error codes - absorption, float, Flashing Invertor and low battery.
The system was reset a number of times with no change in status
The system logs don't show anything for the period of time the Victron was down for (2 days). It came back up again with no user intervention (suspect maybe a short power outage may have reset the system).
The BMS for the ZCell is on the UPS circuit and was down as well.
Any help would be appreciated to prevent this happenning again.
