question

jemal-swoboda avatar image
jemal-swoboda asked

MPPT SmartSolar 100/30 Charge Controller Support

1eaacb36-f199-43e5-a477-ef75fa9dc82f.jpegRecently installed this system in line with a 100 12 V Battle Born battery and a 12 V AIMS Power 1250 W inverter charger. The controller remained with a blue light on bulk but appeared to be charging the battery. Curious if I’m doing something wrong or a voltage threshold hasn’t been met that would activate the absorption or float lights to activate.

MPPT SmartSolarinstallation
4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jemal-swoboda avatar image jemal-swoboda commented ·

Also, it seems to only accept a PV charge when the inverter is turned into power save mode (inverter off) versus Power On mode.

0 Likes 0 ·
seb71 avatar image seb71 commented ·

It sounds like you did not set it up for your battery.

0 Likes 0 ·
jemal-swoboda avatar image jemal-swoboda seb71 commented ·

Thanks! The installation guide stated to set to 7 for a lithium iron phosphate battery. My BMV 712 is measuring the wattage coming in. Is there another step to be updated?

0 Likes 0 ·
Show more comments
0 Answers

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic