Hi this may be a stupid question but I'll ask it anyway. A customer has come to me with a victron 230v 3 output 30a 12v charger. He has a bus with 2 12volt agm batteries. They are wired in series for 24 volt but he also has a 12 volt system so he takes that from one of the 2 batteries. I know this isn't ideal but it's what he has. My question is can I wire up each battery to 2 of the outputs on the charger? Will this charge each battery individually depending on individual voltages or will it put the same voltage to both? Is this the best way to do it as one of the batteries gets discharged more due to it supplying 12v as well as the 24v in series. Any info would be great.