I am considering a cerbo gx and touch setup for my vehicle. I can't see anything in the documentation about using it with the Orion dc-dc chargers. Are they compatible? And will the cerbo gx monitor them.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am considering a cerbo gx and touch setup for my vehicle. I can't see anything in the documentation about using it with the Orion dc-dc chargers. Are they compatible? And will the cerbo gx monitor them.
Hello Bill-ritchie, no you can not see the DC/DC charger directly on the Cerbo GX display.
What you can do is of course show the battery that being charged with a battery monitor.
Based on the SOC you can activate the Relay in the Cerbo GX, what then can remote start your DC/DC charger (with in series an other ON relay.. if the engine is running.) Just a other example of what is possible.
Best regards,Rob
Maybe in the near future I hope :-) This tiny little symbol would be nice to have.
https://www.victronenergy.com/upload/documents/Manual-Color-Control-GX-EN-240820.pdf
Page 10:
Orion-Tr Smart Dc to DC Charger, Alternator Victron Energy
__________
Orion-Tr Smart DC-DC Charger Isolated 12 / 24 Volt- Product Page
Orion-Tr Smart DC-DC Charger Isolated 12 /24 Volt - Datasheet
Orion-Tr Smart DC-DC Charger Isolated 12 /24 Volt - Online Manual
__________
Orion-Tr Smart DC-DC Charger Non-Isolated 12 /24 Volt- Product Page
Orion-Tr Smart DC-DC Charger Non-Isolated 12 /24 Volt- Datasheet
Orion-Tr Smart DC-DC Charger Isolated 12 /24 Volt - Online Manual
__________
28 People are following this question.