This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have two SmartShunts connected to the Cerbo with VE.Direct.
As far as I understand the Cerbo puts the information on the VE.CAN.
Is there a table with the available VREG's? Is it similar to the Lynx Ion?
Which VREG's are sent periodically, which are send on change and which need to be requested?
I would also like to find out the vregs associated with the Smartshunt.
Tried to get the information my Victron distributor, to no avail.
I have developed a controller that communicates with the Cerbo GX to extract vregs for controlling a 48vdc generator. Managed to only extract the Smartshunt and Cerbo firmware versions.
Bit hard when you are searching in the dark!
Let's hope someone from Victron can shed some light.
Try searching for victron modbus. Brings up a manual and a link to download the spreadsheet with the required info
