question

federico avatar image
federico asked

RS Smart Solar 48/6000 problem after firmware update

Hi all!

I'm new to the community, this is my actual configuration:

-2 strings of 6 x 250W Poly Total 3 KW

-48 V 320Ah C5 lead-acid traction battery

-RS Smart Solar 48/6000


After updating the firmware to the version 1.03 for connecting the VE.direct > USB interface, the inverter sometimes go in fault condition, with the alarm codes 53 (Inverter internal DC level) and 29 (Overcharging protection). Moreover these alarms are not included in the alarm list site. If anyone knows if there is a list of specific alarms for this Inverter, please let me know, Thanks!

firmware updatealarminverter rsfault
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Federico, I’m not sure what your issue is, but I’ll make sure you’re answered beginning of the coming week.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Hi just to make it complete here: this was solved through our support desk.

0 Likes 0 ·
Show more comments

Related Resources


Inverter RS Product page.

Inverter RS Online Manual.

Inverter RS Datasheet.

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Faults with Victron equipment are best discussed directly with your dealer - this can be formalised with this support request form.