This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I've written my own driver for the Venus, added it's settings to the settings dbus, now I'd like to add my own settings page in the gui to change them. Is there a good resource / example code set to look at for guidance on how to do that?
Thanks in advance.
Take a look at GuiMods2 from @Kevin Windrem
Here is a link to the discussion https://community.victronenergy.com/idea/105909/guimods2-replaces-guimods.html
Use GuiMods - it has all the features of GuiMods2
https://github.com/kwindrem/GuiMods
If you have used the dbus settings correctly then the gui should display those as fields that the user can change from the GUI. No need to create a custom screen. Take a look at my Mqtt driver for an example : https://github.com/freakent/dbus-mqtt-devices
if set up the transfers correctly for an existing device such as BMV type then you should have no problems ... BUT be aware that each firmware update will reset an changes you make.
general better to set up your own web page if you need a lot more detail and information to be made available.
