This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello everybody
I have a 150W poly panel and a 100/20 mppt with connected a 12V fridge that consumes a lot (about 45W) I would like to connect the load output of the mppt directly to the batteries (or only to the fridge) to monitor the absorption. Does that make sense?
A fridge drawing 45w an hour. That is like 96 Ah a day...
Of course a small fridge wont run 24 hours without cycling... Unless it is hot, or used..
A 100/20 is wasted on a 150w panel.
